 |
| What Makes Our Recycled Rubber Parking Products
So Unique? |
|
| - |
|
An Inside Look at Our Parking Lot
Safety Solutions
With over 14 years of experience molding recycled rubber products, GNR Technologies
has learned a great deal about the required needs of the Traffic
Control /
Safety industries. Our Parking
Lot Safety Solutions have evolved one step at a
time as we consistently strive to improve our product offering and
value.
We knew from early on, the importance and necessity of
promoting a
'greener' environment through the re-use of materials. All of our
solutions are manufactured from 100%
recycled tires, thus helping to reduce millions of scrap
tires that would otherwise be sitting in U.S. landfills.
Our products have gone through extensive testing to ensure high
product quality and optimal results. Attention to detail and unique
product features has allowed GNR to become one of the leading
manufacturers of parking solutions.
We know what works, and it starts from the inside out:
-
|
|
|
|
|
| - |
|
-
|
The
Easy Rider Speed Bump is profiled at 2.25" high and 12" wide. The
channeled bottom allows the product to cover cabling and helps to
facilitate proper water drainage from under the product.
-
|
|
|
-
|
In-molded
reflective highway tape with glass bead reflectors help increase the
speed bump visibility - to not only drivers but pedestrians as well -
especially at night. Unlike paint, the in-molded tape will not fade.
-
|
|
|
|
Cat's
eye
reflectors are molded into the product to enhance visibility to drivers
- especially
during night hours. As vehicles approach the speed bump, their
headlights shine brightly in the reflectors making drivers aware of
the device from a distance. Each reflector is recessed into the side of
the speed bump to prevent damage from vehicles.
|
|
|
|
End caps
are available and recommended for the speed bump.
|
|
|
|
Using
an interlocking system, the end cap fits directly into the channeled
bottom to increase stability and prevent the end cap from shifting.
|
|
|
 |
These
are necessary to help protect the speed bump ends as well as ensure a
smooth, safe ride for drivers. |
|
|
| -
|
|
|
| - |
|
-
|
Each
Safety Rider Mini Hump section is profiled at 2.1" high and 35.5" long.
-
|
|
|
-
|
In-molded
reflective highway tape with glass bead reflectors has been applied in
a checker pattern to increase the speed hump visibility. The tape is
recessed into the product to increase the tape durability and avoid
wear-and-tear.
-
|
|
|
-
|
The
recessed sections and raised molded rubber pattern provides a
high
traction area for vehicles and pedestrians to avoid slipping.
-
|
|
|
-
|
The
interlocking tongue-and-groove system allows for complete customization
of the speed hump. Multiple sections can be combined to cover the
length of any roadway.
-
|
|
|
-
|
Six
(6) lag bolts are required for each Safety Rider section to ensure
stability and prevent the product from shifting.
|
|
|
 |
Sloped
end
caps are available and recommended for the speed hump to help
protect the ends and ensure a smooth, safe ride for drivers.
|
|
|
| - |
|
|
| - |
|
-
|
Our
Park-It car stop is profiled at 4" high and 6" wide. Hollow
pockets in the bottom of the product not only make the product lighter,
but it also allows for greater flexibility enabling the Park-It to mold
to the contours of uneven road surfaces.
-
|
|
|
-
|
In-molded
reflective highway tape with glass bead reflectors is applied in
parallelograms along both sides of the car stop to increase the Park-It
visibility. The ends are also covered with in-molded tape to help
prevent tripping accidents by passing pedestrians.
-
|
|
|
-
|
Typical
concrete bumpers are 6" high and often scrape the underside of
vehicles. GNR's low-profile Park-It was designed to allow modern-day
low front end vehicles to park right up against the bumper without
causing damage.
-
|
|
|
 |
Each
6' Park-It requires four (4) anchors for installation. The recessed
holes ensure the hardware affixes tightly to the product and
installation surface. |
|
|
| - |
| - |
|
GNR's
parking products have been designed with safety, durability, and
visibility in mind. These recycled rubber solutions are lightweight,
easy-to-install, and can be applied for temporary or permanent use.
For more information on our Distribution Opportunity or product line,
please visit our website: www.gnrtech.com
or contact our office by email or
phone:
1-800-641-4143. |
|
|
| - |
| - |
-
|
 |
GNR Technologies
990 Upton
LaSalle,
QC H8R 2T9 |
|
|
>
